1. Check thermostat (function, settings, location)
2. Check lubricate/furnace fan motor (as applicable)
3. Check blower motor amps (as applicable)
4. Check filter system (clean/replace if needed)
5. Check contactor (clean as required)
6. Inspect condenser fan motor and blades
7. Check condenser coil (clean as required)
8. Check compressor
9. Check refrigerant pne temperature
10. Check evaporator temperature drop
11. Check humidifier damper position
12. Check condensate pump/lines (clean as required)
13. Inspect electrical connections (tighten, clean as required)
14. Check capacitors (for leakage function)
15. Check electrical loads/current draw
16. Clear debris from condenser
17. Inspect service valve
18. Clean blower (removal of blower not included)
19. Inspect evaporator coil (clean as required if accessible)
20. Locate/identify system switch and/or breaker
21. Check and advise on performance and air distribution